Verint Nextiva S4200-2V-BZ, Руководство пользователя

Страница: 69 / 152

Verint Video Intelligence Solutions 63
Nextiva S4200 Series User Guide
6. In the HTTP Access list, indicate whether the access to the web interface of the device
in a non-secure context is allowed. If you block this access, you can only set up the
device with SConfigurator or Telnet.
7. In the HTTPS Access list, indicates whether the access to the web interface of the
device in a secure HTTP (HTTPS) context is enabled.
8. In the Use Web Client Accounts list, indicate whether the use of user accounts to
access the device with the web interface is enabled. To define user accounts, see
page 61.
9. In the Global Security Profile list, indicate whether the complete SSL security on the
device is enabled. Once this profile is activated on a device:
†
You cannot access it anymore with Telnet.
†
You cannot perform firmware updates through the IP network.
†
You access its web interface in a secure mode (that is, the HTTPS access mode is
enabled).
10. In the SSL Passkey box, enter a password to secure the connection with the device.
The passkey must be the same for all devices and the software tools to allow proper
secure communication between them.
11. To continue the configuration process, select another parameter category in the
navigation pane. Otherwise, click Apply to save the changes in the device. Depending
on the changes you made, a reboot may be required; follow the on-screen instructions
in the Device Configuration Submittal pane.
Tip: You should not change this passkey with the web interface, since there could be
eavesdropping on the network. You can use SConfigurator or a video
management software to change it.