Verint Nextiva S4200-2V-BZ, Руководство пользователя

Страница: 68 / 152

4: Using the Web Interface
62 Verint Video Intelligence Solutions
4. In the Web Client x User Name box, enter the alphanumeric string identifying a web
client user.
5. In the Web Client x Password box, enter the alphanumeric string protecting the
access to the device for a web client user.
6. In the Web Client x list, indicate whether the web client number x is enabled.
7. If required, repeat the web client configuration steps for all web client users. Up to five
web clients are available.
8. To continue the configuration process, select another parameter category in the
navigation pane. Otherwise, click Apply to save the changes in the device. Depending
on the changes you made, a reboot may be required; follow the on-screen instructions
in the Device Configuration Submittal pane.
Security
The security parameters are relative to the protection of the device.
To configure the security parameters:
1. In the navigation pane, expand Configuration > Access Management, then click
Security. The security parameters appear.
2. In the Telnet Session list, indicate whether the access to the CLI of the device with
Telnet is allowed.
3. In the Use Telnet Accounts list, indicate whether the use of user accounts to access
the device with the CLI is enabled. To define user accounts, see page 61.
4. In the XML Report Generation list, indicate whether the generation of an XML report
presenting the current state of the device is allowed.
5. In the IP Firmware Update list, indicate whether firmware updates on the device
through the IP network are allowed.