Verint Nextiva S4200-2V-BZ, Руководство пользователя

Страница: 48 / 152

3: Configuring and Installing the Device
42 Verint Video Intelligence Solutions
3. Ensure that there is end-to-end video transmission in the lab before installing the
devices in their final location.
The initial configuration is now complete for the two devices.
Performing a Point-to-Point Connection
A point-to-point connection is the association of a transmitter and a receiver to view video
coming from an analog camera on an analog monitor. The Nextiva receivers are the
S1970e-R and S1504e-R. You can connect each of these receivers to up to four
transmitters, to create a maximum of four different point-to-point connections. Here is a
single connection:
You can also use a point-to-point connection to transfer audio, input/output, or serial port
data, if the transmitter and receiver have these features.
Typically, both devices sit on the same IP subnet as SConfigurator and have the same VSIP
port; to access other devices, refer to the device discovery section in the Verint
SConfigurator User Guide.
To associate a transmitter and a receiver in a point-to-point connection:
1. Start SConfigurator.
2. In the Units tab, discover the desired devices. The discovered devices appear in the
Units box.
3. Select the Connections tab, then click Add. The Connection Creator window appears.
Transmitter Receiver Access point