Verint Nextiva S4200-2V-BZ, Руководство пользователя

Страница: 100 / 152

4: Using the Web Interface
94 Verint Video Intelligence Solutions
9. To send a copy of the image to the Windows clipboard, click capture .
Maintaining the Device
The following maintenance tasks are available on the web interface:
„
Reboot—To restart the device, while keeping its current configuration and saving the
changes.
„
Load—To assign the factory default settings to the device. You may keep the values of
many network parameters. The default values are listed in Appendix A on page 105.
„
Update—To upgrade the firmware of the device.
For more information about these tasks and when you should perform them, see the
“Maintaining and Troubleshooting the Device” chapter.
To reboot the device:
1. In the navigation pane, click Maintenance. The maintenance pane appears.
2. Click Reboot. A confirmation window appears.
3. Click OK.
To load the default values of the device:
1. In the navigation pane, click Maintenance. The maintenance pane appears.
2. To keep the following network parameters, ensure that Keep Network Settings is
checked:
Otherwise, you will need to reprogram the device for proper operation within the
network.
„
DHCP usage
„
Gateway
„
Ping request target
„
Subnet
„
IP address
„
DNS servers
„
Ping request size
„
Host name