Verilux PageLight VB04, Руководство пользователя, Страница: 3 / 4

3
SET UP & OPERATION
BATTERY INSTALLATION
Prior to initial usage of the PageLight, the Light Blocking Strip needs to
be placed on the bottom edge of the lens to ensure that the PageLight is
illuminated evenly.
Take the Light Blocking Strip (Fig. 1) and gently guide the clear lens into the
groove of the strip. Strip is correctly installed when centered on the bottom of
the lens.
Use only AAA batteries in your PageLight.
1. Remove battery compartment panel at the back of the PageLight (Fig. 2).
Take out any dead batteries and dispose of in a proper manner.
Fig. 1
Fig. 2
Dial
To turn the PageLight on, turn
the dial on top of the unit until
an audible ‘click’ is heard.
Rotate the dial to change the
brightness level. Maximum
brightness is achieved when
dial is rotated farthest from the
initial on ‘click’. To turn the unit
off, reverse this procedure.
2. Following the indications
on the inside of the battery
compartment, insert 3 AAA
batteries into place. Please
make sure that the “+” and “-”
are facing in the right direction,
otherwise PageLight will fail to
operate.
3. Once batteries are inserted,
replace battery compartment
panel.