Verilink WANsuite 5165, Справочное руководство

Страница: 136 / 235

4-12 W A N s u i t e 5 1 6 5
Figure 4.9 Performance 30 Day Screen
CAUTION:
Performance data will be lost upon power cycle or after performing a
Maintenance Reset/Restart.
Serial Screens
NOTICE:
All references in this manual to the Serial 1 and Serial 2 interfaces
correspond directly to the WANsuite 5165’s Data 1 and Data 2 ports,
respectively.
The Serial screens let you view and make changes to the unit’s Serial
interface configuration as described in the paragraphs below. The parameters
on the Serial 1 and Serial 2 screens are the same, except for the “Invert
Clock” parameter, which is found only on the Serial 2 screen (Figure 4.10).
To make changes to any Serial parameter, simply set the parameter to the
desired selection and press the “Esc” key.