VeriFone VX 685 GPRS, Руководство по установке

Страница: 16 / 56

S
ETUP
Connection Port
16
VX 685/VX 690 I
NSTALLATION
G
UIDE
Connection Port The terminal has one primary micro-USB port used for power and download.
Figure 3 Micro-USB Port on the Terminal
Paper Roll A fast and quiet thermal printer is built into the terminal. You must install a roll of
thermal-sensitive paper in the printer before you can process transactions that
require a receipt or record.
The ITP uses a roll of single-ply and thermal-sensitive paper 40 mm in diameter. A
pink out-of-paper indicator line appears on the edge of the paper approximately
18 inches before the end of the roll. After this line appears, there is enough paper
remaining on the roll to conclude at least one transaction.
Installing or
Replacing a Paper
Roll
To install or replace a paper roll:
1
Gently pull the latch on top of the terminal to unlock the compartment.
2
Lift the printer cover up and back.
3
Remove any partial roll of paper in the printer tray.
4
Loosen the glued leading edge of the new roll of paper or remove the
protective strip, if applicable. Unwind the paper roll past any glue residue.
5
Hold the roll so the paper feeds from the bottom of the roll when the terminal is
inverted.
CAUTION
Poor-quality paper can jam the printer and create excessive paper dust. Refer to
Accessories and Documentation to order high-quality Verifone paper. Store
thermal paper in a dry and dark area. Handle thermal paper carefully. Impact,
friction, temperature, humidity, and oils affect the color and storage
characteristics of the paper. Never load a roll of paper with folds, wrinkles, tears,
or holes at the edges in the print area.