VeriFone VX-670 series, Руководство по установке, Страница: 27 / 52

T
ERMINAL
S
ETUP
V
x
670 Battery Behavior (No Power Cord)
V X 670 I
NSTALLATION
G
UIDE
27
Standard Battery Pack
The standard battery has a capacity of 1250mAh. It is suited for WiFi and pay-at-
table applications where frequent charging is required.
High-Capacity Battery Pack
The high-capacity battery pack is larger than the standard battery pack and is
more suitable for GPRS/CDMA applications.
Smart Battery
Features
The following are features of the smart battery:
•
Two Li-ion cells
•
A fuel gauge module that
•
monitors state of charge (voltage and percentage of capacity),
•
communicates with the terminal (charge parameters and status),
•
determines full charge capacity (on charge cycle and uninterrupted
discharge cycle), and
•
automatically shuts down when cell voltage is extremely low.
•
A safety circuit that
•
prevents cell damage from overcharge, over-discharge, or overheating,
and
•
activates when the battery is left in an unused terminal for extended
periods.
V
x
670 Battery
Behavior (No
Power Cord)
When you have finished connecting optional peripheral(s), you are ready to power
the V
x
670 terminal from the attached battery.
Manual Startup Hold the green key down through a series of short beeps until the terminal
displays the startup screen.
NOTE
Conserve battery power by turning the V
x
670 terminal off when not in use. If the
terminal is not to be used for several days, remove the battery from the terminal
as it continues to discharge even when the terminal is turned off.
NOTE
If you connect the V
x
670 to a non-battery power source, the terminal shifts to
corded power mode and starts up automatically, regardless of the battery charge
state.