User guide
V240m+
EN
TERMINAL SET-UP
■
Connect the power to the terminal.
■
When first powered on, the terminal will start-up and
after a short while, this screen should be displayed.
■
Press the green key to continue.
■
If you ordered the Mobile option (with SIM card) the
display should show Mobile Data connection as ‘UP’ a short
while after powering on the terminal.
■
If using a SIM card but NOT using WiFi, press the red key
to skip the next section and go to page 5
User guide EN
V240m+
3
WI-FI SET UP (OPTIONAL)
■
Using the touch screen, scroll down to
‘Configuration’
and select this option.
■
On the Configuration screen , select ‘Network Interface’
.
■
On the Network Interface screen, select ‘WiFi’
.
■
Press ‘WiFi Scan’ to search for available WiFi networks.
■
Select the preferred network.
■
Press ‘Add’ to progress to the next screen.
■
Select
‘Pre
-Shared-
Key’
.
DO NOT PRESS SAVE.
■
Using the number keys, enter your WiFi password.
For alphabet characters, if necessary, keep pressing the
same key that has your character to cycle through the
options until your character appears on screen. Some
passwords contain upper & lower case characters. Keep
pressing the key as it cycles through the upper and lower
case options if necessary.
Note that if the next character in your password is on the
same key as the previous character, you must wait until
the * appears before pressing the same key.