VERDER VERDERAIR VA-E25, Операция

Страница: 20 / 42

Operation
Pressure Pressure Pressure Relief Relief Relief Procedure Procedure Procedure
Follow the Pressure Relief Procedure
whenever you see this symbol.
This equipment stays pressurized until pressure
is relieved manually. To help prevent serious
injury from pressurized fluid, such as splashing
in the eyes or on skin, follow the Pressure Relief
Procedure when you stop pumping and before you
clean, check, or service the equipment.
1. Remove power from the system.
2. Open the dispensing valve, if used.
3. Open the fluid drain valve (L) to relieve fluid
pressure. Have a container ready to catch the
drainage.
4. Close the pump air valve.
5. Units Units Units with with with a a a compressor: compressor: compressor: Cycle the valve to
bleed any remaining air.
Pump Pump Pump Shutdown Shutdown Shutdown
At the end of the work shift and before you check,
adjust, clean, or repair the system, follow the
Pressure Relief Procedure, page 20 .
20 859.0510