Verathon AORTASCAN AMI 9700, Руководство по эксплуатации и техническому обслуживанию

Страница: 65 / 88

57
Operations & Maintenance Manual: Cleaning & Maintenance
REGULAR INSPECTIONS
Verathon
®
recommends that the AortaScan AMI 9700 be certified by an authorized Service Center once a
year. Certification service includes comprehensive inspection and testing of the instrument to ensure proper
performance in clinical use. For more information, please contact your authorized Verathon Service Center,
your local Verathon distributor, or Verathon Customer Care.
Note: ScanPoint
®
Online customers can maintain device certification via the Internet by accessing their
ScanPoint account. For more information about using ScanPoint Online, please refer to the ScanPoint with
QuickPrint user’s manual.
WEEKLY INSPECTIONS
Once a week, you should inspect the probe and cable for physical faults or cracks. Cracks that allow the ingress
of fluid may affect the performance of the instrument. Any apparent cracks or faults in the console, probe, or
the cable that links the console and the probe, must be referred to your authorized AortaScan Service Center,
your local Verathon distributor, your local Verathon representative, or Verathon Customer Care.
MAINTENANCE
PROCEdURE 1. RUN A SELF TEST
The AMI 9700 can perform a number of self‑diagnostic tests. To access the Self Test utility:
1. From the Home screen, press the
Settings
button .
2. When the Settings screen opens, press the
Up Arrow
button or
Down Arrow
button buttons
until Self Test is highlighted in red, then press the Enter button . The Self Test screen opens and
testing begins automatically. The display provides status and results, and when the test in complete, the
printer prints the results.
Note: Make sure the printer is loaded with paper. See Load the Thermal Paper.
3. If the screen indicates any failed tests or abnormal results, contact your authorized AortaScan
representative, or contact the Verathon Customer Care Department.
4. When the test is complete, press the
Settings
button to return to the Settings screen, then press the
Home button to return to the Home screen.