Vents VKP 125 mini, Руководство пользователя

Страница: 11 / 20

11 www.ventilation-system.com
WHILE INSTALLING THE UNIT ENSURE CONVENIENT ACCESS FOR SUBSEQUENT
MAINTENANCE AND REPAIR.
BEFORE MOUNTING MAKE SURE THE CASING DOES NOT CONTAIN ANY FOREIGN
OBJECTS (E.G. FOIL, PAPER).
the fan is suitable both for horizontal and vertical installation. to get the best performance of the unit and to minimize turbulence-
induced air pressure losses, connect the straight air duct section to the spigots on both sides of the unit while installing. Minimum
straight air duct length: equal to 1 air duct diameter on intake side and to 3 air duct diameters on outlet side. no filters or any other similar
devices are allowed to be installed in these sections.
Model
Dimensions,
mm
Model
Dimensions,
mm
H1 H2 H1 H2
VKP 80 mini
60 200
VKP 100/100х4 mini
60
200
H1
H2
VKP 80 Р mini VKP 100/100х5 mini
VKP 80/80х2 mini VKP 100/100х6 mini
VKP 80/80х4 mini VKP 100
VKP 80/80х5 mini VKP 125
VKP 80/80х6 mini VKP 125/100x4
VKP 100 mini VKP 150
250 VKP 100 Р mini VKP 150/125x2
VKP 100/80х2 mini VKP 160
VKP 100/80х4 mini VKP 125 (S) mini (Duo) 200
VKP 100/80х5 mini VKP 150 mini (Duo)
250
VKP 100/80х6 mini VKP 200 mini (Duo)
VKP 100/100х2 mini
CAUTION!
If necessary, close the fan spigot with a plug, lubricate the rubber seal of the spigot with silicone grease.
Silicone grease for rubber seals is purchased separately, plugs are available on request.
!
Install a backdraft damper to prevent air back drafting (optionally).
a) Unit ceiling mounting b) Unit wall mounting
INSTALLATION AND SET-UP