Vents KSA 100 2E, Руководство пользователя

Страница: 11 / 16

11 www.ventilation-system.com
STORAGE AND TRANSPORTATION REGULATIONS
• Store the unit in the manufacturer’s original packaging box in a dry closed ventilated premise with temperature range
from +5 ˚С to +40 ˚С and relative humidity up to 70 %.
• Storage environment must not contain aggressive vapors and chemical mixtures provoking corrosion, insulation, and sealing
deformation.
• Use suitable hoist machinery for handling and storage operations to prevent possible damage to the unit.
• Follow the handling requirements applicable for the particular type of cargo.
• The unit can be carried in the original packaging by any mode of transport provided proper protection against precipitation and
mechanical damage. The unit must be transported only in the working position.
• Avoid sharp blows, scratches, or rough handling during loading and unloading.
• Prior to the initial power-up after transportation at low temperatures, allow the unit to warm up at operating temperature for at least
3-4 hours.
PROBLEM POSSIBLE REASONS TROUBLESHOOTING
The fan does not start. No power supply.
Make sure that the unit is properly connected to the power
mains and make any corrections, if necessary.
Low air flow.
The ventilation system is soiled
or damaged. Make sure the air ducts are clean and intact. Clean them if
necessary.
Noise, vibration.
The fan impeller is soiled. Clean the impellers.
The screw connection is loose. Tighten the fastening screws.
TROUBLESHOOTING