manualshive.com logo in svg

Ventrac LX423, Руководство оператора, Страница: 23 / 49

Поделиться
Скачать
Ventrac LX423 Скачать руководство пользователя страница 23

Specifications - 23

Dimensions

Overall Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  54 inches (137.2 cm) 
Overall Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44 inches (111.8 cm)
 . . . . . . . . . . . . . . . . . . . . . with LE 3000 series power unit - 107.25 inches (272.4 cm)
Overall Width     .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   42 inches (106.7 cm)
Auger Opening Width  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 inches (96.5 cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .405 pounds (183.7 kg)
Auger Diameter  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 inches (40.6 cm)
Auger Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185 RPM* / 173 RPM**
Fan Diameter    .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   . 19.5 inches (49.5 cm)
Fan Shaft Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 700 RPM* / 656 RPM**
Chute Rotation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180 degrees
Blowing Distance     .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   . Approximately 35-40 feet (10.7-12.1 meters)
Snow Capacity***  . . . . . . . . . . . . . . . . . . . . . . . 2,500 lbs/minute (1,134 kg/minute)

*Based on engine speed of 3,200 RPM

**Based on engine speed of 3,000 RPM

***Capacity is dependent upon conditions.

Features

2 Stage Snow Blower
Vertical Discharge Chute Adjustment (Manual)
Hydraulically Controlled Direction Discharge Chute, Left to Right
Extra Heavy Duty Shaft and Bearings
Adjustable Skid Shoes

SPECIFICATIONS

Содержание LX423


















































Отзывы:

Нет отзывов