Ventrac KW450, Руководство оператора и чертежи запасных частей

Страница: 32 / 83

SERVICE
Service - 32
Wiper Blade Replacement
The wiper blade should be replaced
on a yearly basis, or sooner if the
blade does not clean the windshield
effectively.
1. Remove the nut and bolt (A)
that fasten the wiper blade to
the wiper arm.
2. Install new wiper blade and
reinstall the nut and bolt.
Interior Light Bulb Replacement
1. Push in on the bulb (A) and turn counterclock-
wise to release.
2. Remove bulb from the light socket.
3.
Remove Install
A
Align the pins on the new bulb with the slots in
the light socket.
4. Push in on the bulb and turn clockwise.
Work Light Bulb Replacement
The work lights are equipped with LEDs and do not
use a replaceable bulb. If a work light no longer
functions, the entire light must be replaced.
Turn Signal Bulb Replacement
1. Remove the 3)
screws (A) from the
turn signal lens and
remove the lens.
2. Push up on the turn
signal bulb (B) and
turn counterclock-
wise to release.
3. Remove bulb from
the light socket.
4. Align the pins on
the new bulb with
the slots in the light
socket.
5. Push in on the bulb
and turn clockwise.
6. Reinstall the turn
signal lens.
Strobe Beacon Bulb Replacement
1. Turn the strobe beacon off and wait five minutes
A
.
High Voltage!
Before removing lens, turn off power and wait
five minutes.
2. Unscrew the strobe
lens (A) from the base.
3. Hold the circuit board
(B) in place with one
hand and remove the
strobe bulb (C).
B
C
4. Install the new strobe
bulb. Push securely
onto the circuit board
connectors.
5. Check to ensure the
circuit board and
the O-ring are in
place, and reinstall
the strobe lens.
A
A
A
A
B