VLCD-WK4 Wireless Camera & Monitor Kit
Specification
:
Parts included:
•
4.3” Wireless Monitor x 1
•
Wireless IR Camera x 1
•
12V Monitor Power Cable x 1
Ventra Technology Inc.
Covina, CA. USA
www.ventrainc.com
Tel: 888 4183833
Model
VLCD-WK4
Camera / Monitor
1 to 1
Camera
1/3.7” CMOS
Camera Lens / Resolution
2.5mm / 648 x 488
Camera Angle
120 degrees (D) / 90 degrees (H)
Camera Rating
IP68 Outdoor Rated
IR LED / Distance
5 LED / Up to 15ft
LCD Screen Size
4.3” TFT LCD
Resolution
420 TVL
Transmission
2.4GHz
Brightness / Contrast
500cd/m2 / 500:1
OSD Control
Contrast, Sharpness, Brightness
Viewing Mode
Normal, Mirror, Flip
Latency
120ms Max
TV System
NTSC / PAL
Max. Frame Rate
30 FPS Max
Monitor Power
DC 5V ~ 32V 180mA
Camera Power
DC 10V ~ 32V 220mA
PowerConsumption
12V (210~250mA)
Temperature Range – Operating
14F ~ 150F
Temperature Range - Storage
-22F ~ 165F
Installation Guide
1.
Determine the location of the camera mounting position. Camera may be mounted directly over / behind the license plate or other
locations
2.
Test the viewing angle by powering both the camera and monitor first before permanently securing the camera
3.
Once location is determined, securely affix mounting bracket of the camera to the vehicle via screws. (Not included)
4.
Connect the 2 wires on the camera (Red = 12V Positive, Black = Ground) to a power source (i.e. tail light, reverse light or vehicle fuse)
5.
Determine location to install the monitor, clean surface with damp towel. Monitor may be mounted on dash, ceiling or any flat
surface
6.
Remove the adhesive on the bottom of mount and firmly affix all wedges of mount to surface by applying pressure
7.
Connect the provided 12V USB power cable into the monitor, then connect it to the vehicle AUX power outlet
Warning
:
Install product only when vehicle is safely parked, leveled and power is Off
View and access the monitor only when safe to do so
Review surrounding before operating / moving vehicle
Observe all electrical safety guideline and polarity to avoid injury
