Ventmatika 3S, Техническое руководство

Страница: 19 / 24

19
2. SETTINGS
2.1 „EDIT MODES“ – set fan speed and temperature for each event and “Fireplace” function ( difference
between EAF speed and SAF speed).
2.2 „LANGUAGES“ – language selection:
•
English - English.
•
Lietuvių - Lithuanian.
•
Русский - Russian.
2.3 „DATE“ – set date.
2.4 „TIME“ – set time.
2.5 „VOLUME“ - switch ON / OFF alert sound and screen touch sound.
2.6 „BRIGHTNESS“ – set overall and screensaver backlight. It is recommended to switch off screensaver
backlight to save energy.
2.7 „VERSIONS“ - versions of hardware, firmware, software and remote controller.
2.8 „ADITIONAL SETTINGS“ (see 3).
2.9 „VIEW ALARMS“ – view actual alarms, AHU is stopped:
•
„Supply air temperature sensor fail“ ( -40°C +120°C)
•
„Extract air temperature sensor fail“ ( -40°C +120°C)
•
„Outdoor air temperature sensor fail“ ( -40°C +120°C)
•
„Exhaust air temperature sensor fail“ ( -40°C +120°C)
•
„Return water temperature sensor fail“ ( -40°C +120°C)
•
„Extract humidity sensor fail“ ( <5%)
•
„Fire input“ - external Fire input is active
•
„Rotor fail” - rotor heat exchanger fail
•
„Antifrost“ - critical minimal temperature of water heater
•
„Overheat“ - heater overheat
•
„Motor overheat“ - fan motor fail
2.10 „SYSTEM RESTART? “ – in case of malfunction the system is in Standby mode. It is necessary to restart
AHU after eliminating failure.