18
5
E
THERNET
uManager 10 is a converter with built-in http server, which enables remote management of air
handling units controlled by Uni Control System controllers by mean of a smartphone, tablet or
computer. Communication with the is done via a website with a graphic interface, so you can manage
the unit from anywhere in the world if the network is available. You can connect from iOS and Android
or Windows devices. The smart interface recognizes the type of terminal and adapts automatically to
it. The site works under various Internet browsers like Firefox, Chrome, Safari etc ....
5.1
SAMPLE INTERFACE PAGES
:
5.2
C
ONNECTION
Connect the converter from one side to the controller through the RS485 serial port (terminals A, B)
and on the other hand to the Internet socket.
A 24VAC supply must be connected to the G0, G terminals
Descriptions of symbols:
•
G0, G
: 24 VAC power supply
•
A,B
:
RS485 serial port
5.3
LED
DESCRIPTION
•
POWER
: Power supply signalling
•
Modbus
: Modbus communication signalling Lights up when the transmission starts on
Modbus. Goes off at the end of broadcasting
•
100Mbps
: LED lights up when the physical layer negotiates 100 MBps transfer rate. Goes off
when the cable is disconnected
•
ETH_Link
: The LED lights up when the application has received the packet and is lit for 200
ms
•
RESET
: Device reset
•
FACT RESET
: Restore factory settings
