Vendors Exchange CURVE AP 113, Руководство по установке

Страница: 21 / 36

21 CURVE™ Door AP 113, AP 123, AP 7000
REMO
VE OEM DOOR
INS
TALL DOOR
INS
TALL BUCKET
POWER SUPPL
Y
FINAL INS
TALL
FINAL INS
TALL
INSTALLATION GUIDE
21 CURVE™ Door AP 113, AP 123, AP 7000
ROUTE AND CONNECT HARNESSES
REMO
VE OEM DOOR
INS
TALL DOOR
HARNESSES
INS
TALL BUCKET
FINAL INS
TALL
ADJUS
T DOOR
For AP 113 , and AP 123 , first, using a Self-Tapping Screw
(VE7373K) or Cable Tie (VE4601K) and 4−Way Mount
(VE4650K) (see arrow), attach new harness to left side of
cabinet.
Then, wind the green ground wire around main door harness
about 6 to 8 times. Next, secure main door harness to inside
of the cabinet (A) with Cable Clamp (VE4653K) and self-tap-
ping screw. Then connect ground to cabinet (B).
Next, using (4) cable ties and 4-way mounts, route the new main door harness behind last tray at the bottom.
Next, disconnect cabinet’s main harness from inside the top
of the machine (if necessary) so it has enough play to move
toward the bottom of the machine
Then, for AP 113, and AP 123, run harness in front of machine
behind the coin box mounting
Then, for AP 113 , and AP 123 , connect cabinet main
harness to the door main harness. The power for the coin
mech is no longer used.
INSTALLATION GUIDE
1 2
Left Side of the
Cabinet
Left Side of the
Cabinet
Coin Box
AP 113, AP 123
(Continued next page)
3
Ground Wire
R
Overview
R
To TOC
Cabinet Main
Connector
6
5
4
AP 113, AP 123
Door Main Connector
A
B