Vendors Exchange CURVE AP 113, Руководство по установке

Страница: 19 / 36

NOTE: Support bottom of CURVE door so it stays aligned with the height of the bottom
hinge. Doing so makes sure the door will close properly when installation is completed.
Hold to 90
O
for Proper Open/
Close of Door
Ensure Angle of Hinge Mount
19 CURVE™ Door AP 113, AP 123, AP 7000
INSTALL THE CURVE DOOR
REMO
VE OEM DOOR
INS
TALL DOOR
HARNESSES
INS
TALL BUCKET
FINAL INS
TALL
ADJUS
T DOOR
First, align (3) 1/2” Brass Wash-
ers (VE8718A) over the hole in
the bottom bracket (A) , then in-
sert the pin from the bottom hinge
plate attached to the underside
of the CURVE Door through the
brass washers into the hole in the
bottom bracket (B) .
INSTALLATION GUIDE
Then, align and position Top Hinge Plate
(VE6801P) to holes from the CURVE door,
Top Hinge Shim Plate (VE6801O) , and the
Top Hinge (Reference Step 11, Page 17) on
the as shown in the image.
Then, insert (2) 1/2-20 Flat Head Screws
(VE6836) through the Top Hinge, Top Hinge
Shim Plate, and the CURVE door, threading
them into the Top Hinge Plate as shown.
5
(Continued next page)
Bracket Hole
Align Washers
Bottom Hinge
Hinge Plate
R
Overview
R
To TOC
6
Flat Head
Screws
Top Hinge
Plate
Top Hinge
Plate
Top of the Cabinet
Top of the Cabinet
7
A B