Instructions for programming SVE01 Board
functions
33
© SandenVendo Europe SpA
5 DESCRIPTION AND FUNCTION OF CONTROL UNIT
5.1 Control Unit EASY CAREL
The electronic control unit EASY CAREL regulates and controls the refrigerant system and
all its components: The compressor, the fans, the defrosting, and is independent of the
control of the board SVE01, which control the electronics of the distributor.
On the front of the control unit are: 3 digits, 6 LED indicators that show the operating
conditions and 3 buttons.
5.1.1 Display
1. Compressor LED
2. Fan LED
3. Defrost LED
4. Auxiliary exit
5. Watch
6. Alarm
7. Numbers
The LED light on the display show the operation of the cooling system.
1 Compressor LED: indicates the status of the compressor.
o
LED is lit, the compressor is ON
o
LED blinks, the compressor is waiting before starting (check ES)
o
LED OFF, the compressor is OFF.
2 Fan LED: indicate the status of the evaporator.
o
LED is lit, the fans are running
o
LED blinks, the fans are waiting before starting
o
LED OFF, The fans are turned off
3 Defrost LED: indicate the status of the defrost.
o
LED is lit, The defrost mode is ON
o
LED blinks, is in drip mode after defrost
o
LED OFF, defrost is OFF.
4 Auxiliary exit: not used in this vendor.
