ENGLISH
Please read and save these instructions for future reference.
Read carefully before attempting to assemble, install, operate or maintain the product
described. Protect yourself and others by observing all safety information. Failure to
comply with instructions could result in personal injury and/or property damage!
®
472914 • Mobile Tiltable Carriage Kit, Rev. 2, May 2012
Copyright 2012 © VENCO PRODUCTS • www.vencoproducts.com
DIMENSIONS AND SPECIFICATIONS
E33599
MOBILE TILTABLE CARRIAGE KIT
Form 472914
Designed to mount on VENCO PRODUCTS Industrial Air Circulators (sizes 24" through 48"). Provides a stable portable carriage for air circulator and can be
easily rolled about in industrial environments. Includes quick-turn knobs allowing easy tilt adjustment and multidirectional airflow. Constructed of steel.
UL/cUL Listed Standard 507.
GENERAL SAFETY
WARNING:
To reduce the risk of fire, electrical shock, or injury to persons, observe the following:
a. Use this unit only in the manner intended by the manufacturer. If you have questions, contact the manufacturer.
b. Before servicing or cleaning unit, switch power off at service panel and lock the service disconnecting the means to prevent power from being switched on
accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel. Do
not depend on any switch to disconnect power supply. Always unplug the power cord or turn off and lock disconnecting means as described.
WARNING:
To reduce the risk of electric shock, do not expose to water or rain.
1. Read and follow all instructions and cautionary markings.
2. Disconnect all power before installing or servicing.
3. Follow all local safety codes in the United States and Canada, as well as the Occupational Safety and Health Act (OSHA) in the United States.
UNPACKING
1. Inspect for any damage that may have occurred during transit.
2. Shipping damage claim must be filed with carrier.
3. Check all parts listed are accounted for.
ASSEMBLY AND INSTALLATION
WARNING:
Installation and troubleshooting to be performed only by qualified person(s).
CAUTION:
Support fan securely during assembly and installation.
1. Position fan with cord wrap and switch located on top.
2. Fasten both brace assemblies(A and B) to the air circulator tube using holes provided and four whiz bolts(C) for each assembly. Brace assembly with handle(A)
should be fastened to the opposite side of cord wrap for proper installation.
3. With holes provided, fasten each foot bracket(D) to body channels(E) using four whiz bolts and whiz nuts(F).
4. On one side of carriage, attach foot(G) to body channel and foot bracket using holes provided and four whiz bolts and whiz nuts. Repeat with remaining foot
(same side).
5. On opposite side of carriage, attach wheel(H) with shoulder bolt(I) and washer(J). Insert bolt and washer through wheel, body channel and foot bracket with
holes provided. Tighten using nylock nut(K). Repeat with remaining wheel.
6. For models MAC-TC-42 and MAC-TC-48, fasten leg braces(L) to body channels using holes provided and four whiz bolts and whiz nuts on each leg brace.
7. Carefully, lift and place air circulator tube on top of body channels — multiple persons is recommend. Fasten brace assemblies to carriage using holes
provided and four whiz bolts and whiz nuts on each side. The wheels will be on the opposite side of brace assembly bracket when properly installed.
8. Release quick-turn knobs and align air circulator housing in the desired position for airflow. Re-tighten quick turn knobs.
Cord Wrap
Air Circulator Tube
B
E
L
H
A
G
Body Channel Top
D
K
C
J
I
F
Figure 1 — Mobile Tiltable Carriage Kit Assembly
Model
Use on Model
Includes
Quantity
MAC-TC-24
MAC-24-323-B3-J1
(A) Brace Assembly
with Handle
(B) Brace Assembly
(C) 1/4"-20 Whiz Bolt
(D) Foot Bracket
(E) Body Channel
(F) 1/4" Whiz Nut
(G) Foot
(H) Wheel
(I) Shoulder Bolt
(J) 1/2" Washer
(K) 3/8" Nylock Nut
(L) Leg Brace*
1
1
40
2
2
32
2
2
2
2
2
4*
MAC-TC-30
MAC-30-324-C5-J1
MAC-TC-36DD
MAC-36-322-C5-J1
MAC-TC-36BD
MAC-36-5-J1
MAC-TC-42
MAC-42-320-C7-J1
MAC-42-320-C7-U3
MAC-42-7-J1
MAC-42-7-U3
MAC-TC-48
MAC-48-316-C7-J1
MAC-48-316-C7-U3
MAC-48-7-J1
MAC-48-7-U3
*Included with models MAC-TC-42 & MAC-TC-48 only
