VEMCO - VR2AR / VR2AR-X Manual
15 March 2019
53
7.1.7
I don’t want
VUE to disconnect from the VR2AR after 30 inactive
minutes. How do I change that?
When no user activity occurs between VUE and a VR2AR for 30 minutes, VUE will disconnect the Bluetooth
connection to conserve the receiver’s battery. If you do not want this to occur, open the
Options
window
(section 7.1.6); select the Devices tab and un-
check the “Automatically close inactive
receiver connections after 30 minutes.”
7.1.8
What is the Release Test?
The Release Test is performed by the VR2AR to verify that the
case is closed. If the case is not completely closed, the “Failed
open” warning will appear in the information listed in the
Receiver tab. An open case, even if it only slightly open, will
prevent the mooring lug from being deployed and provides a
high risk of allowing water to enter the case and damage the
receiver.
Clear a failed Release Test by securely closing the case and then
click “Retest” while the VR2AR is in communication with VUE.
The Release Test should change to “Passed”.
