Vemco Ascent AR2, Руководство пользователя

Страница: 41 / 59

VEMCO – ASCENT–AR / AR2 Manual 28 July
2018
34
6
Additional Information
6.1 Flash Memory
The ASCENT-AR uses 16 MB of non-volatile Flash Memory (memory that can retain stored information
even when not powered). The ASCENT-AR will stop logging sensor data once the memory is full.
6.2 Status Light Flashes
The
Status Light (LED) on the side of the ASCENT-AR case flashes based on the task being performed or
the status of the release. The flashes can be interpreted using the table below.
Status Light Flash meanings
LED Flashes Interpretation of Flashes
No flashes Battery is disconnected or has depleted
Two quick red flashes every 5 seconds Logging mode (recording sensor data)
Two quick red flashes every 10 seconds
Memory full
Continuous long red flashes (1 per second) Ready for Bluetooth wireless technology communication
Red light on constantly
Communicating with VUE software using Bluetooth
wireless technology
The Status Light (LED) on an ASCENT-AR flashes either
red or green . Generally, the red flashes are
related to the unit’s status. Just after the ASCENT-AR is powered, it performs a self-test and flashes both the
green and red lights at the same time, making the light look more of an orange colour.
After these “
orange
” flashes, you will see either:

a very long green light to indicate the tests passed and all is well, or

a long red light to indicate there was a problem.
If you see the long
red light followed by more flashes, then contact VEMCO for instructions.