VEMAG 160.0215 Скачать руководство пользователя страница 115

Страница: 115 / 182

ROBOT HP7E / HP10E / HP12E / HP15E / HP20E

7. Cleaning

7-3

7.2.4 Double screws

• Screw the screw extractor (1) into the threaded bore of the right-hand

double screw and pull the double screws out of the double screw

housing, holding the screws steady with the other hand.

1 Screw extractor

Fig. 7-4

Removing double screws

7.2.5 Double screw housing

• Pull the all-in-one double screw housing/two parts of the housing of

the two-part double screw housing right out of the feed cylinder by

hand, holding the housing steady with the other hand.

• If the double screw housing cannot be pulled out by hand, push the

extraction device (1) into housing (2).

1 Extraction device

2 Double screw housing

Fig. 7-5

Inserting the extraction

device

Содержание 160.0215























































































































































































Результаты поиска

Содержание 160.0215

Отзывы:

VEMAG 160.0215, Руководство по эксплуатации, Страница: 115 / 182

Результаты поиска

Содержание 160.0215

Отзывы: