1
WARNING!
Failure to follow these instructions could hinder proper function and cause product failure.
-
1x Rack mounting bracket to be attached to the rear luggage
rack
or
-
1x Seat mounting bracket to be attached to a seat frame
cross-member.
-
1x Storage bag with enclosed canopy
-
1x L-bracket to attach the storage bag to the Rack or Seat
mounting bracket
-
3x Two-part poles, to support the canopy horizontally, these
being:
2x 85cm Side rails with angle joints on one end and
1x 58cm Front rail
-
2x Front rigid straps, which are black nylon straps with Velcro,
stiffened by two-piece fiberglass rods inside them, to be attached
between the frame and the front of canopy to support it vertically
(standard height 27.5 inches)
-
1x small parts bag, containing:
- 2x 5 inch fiberglass rods,
optionally used to shorten the length of Front rigid straps
- 1x 5mm allen wrench.
- 2x Frame straps, which attach the Front rigid straps to the frame
- Transparent
Frame protective strips
to keep the Frame straps and Seat
mounting bracket from scratching your frame
Not provided:
To assemble this product you will also need a 10mm
crescent wrench, or its equivalent
This product is made of the following parts:
Thank you for choosing the VELTOP SUN RIDE.
This product was designed, manufactured and assembled by CYCLO-SYSTEM in France.
To ensure proper function and durability of this product, please read and follow these instructions.
The purpose of the VELTOP SUN RIDE is to protect the user from the sun.
This product should not be used on unpaved roadways, and it is not recommended for off-road riding.
Versions of this product can be installed on nearly all recumbent tadpole tricycles equipped with a cargo rack on the back, or on a seat frame
cross-member of suitable diameter.
INSTRUCTIONS FOR INSTALLATION
& USE
VELTOP SUN RIDE
or
