Velleman TRCV3, Руководство пользователя

Страница: 1 / 15

TRCV3 1 VELLEMAN
TRCV3 – RADIO-CONTROLLED MONSTER TRUCK
1. Introduction & Features
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialised company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for buying the
TRCV3
! Please read the manual thoroughly before bringing this device into service.
If the device was damaged in transit, don't install or use it and contact your dealer.
Please note that the TRCV3 is not suitable for children under 14 years!
2. Safety Instructions
•
Damage caused by disregard of certain guidelines in this manual or by user modifications is not covered by the
warranty and the dealer will not accept responsibility for any ensuing defects or problems.
•
When radio transmission is decreasing, replace the batteries.
•
Remove all batteries when the TRCV3 is not going to be used for a longer period of time.
•
Only use the TRCV3 in safe circumstances, not on public roads, in crowded places or near water.
•
Keep fingers, hair and loose clothing away from moving wheels.
•
Keep this manual for future reference.
•
Do not operate the truck in puddles or rain.
•
Avoid bumping in to objects with the front wheels; the steering servo
could get damaged.
3. Remote Control
1. ON/OFF switch
2. Reverse switch ch1
3. Reverse switch ch2
4. Steering control
5. Antenna
6. Operating indicators
7. Trigger
8. Steering trim adjustment
9. Throttle trim adjustment
10. Steering proportion adjustment
11. Connector for adapter for battery charging
The frequency crystal is located at the back of the remote control.
The batteries are inserted into the grip of the remote control from
the bottom plate.
4. Batteries
•
Make sure both the remote control and the truck are powered
off (fig. 1#1).
•
Truck: open the battery compartment latch (fig.2 #1), remove
the cover, connect a charged 7.2V Ni-Cd battery pack (battery
pack and charger are included) to the battery pack connector
(fig.2 #2), insert the battery pack into the battery compartment (fig.2 #3), put the cover back and lock the latch.
Fig. 1
1.
1.
2.
3.
Fig. 2