CAMRFM3
04/02/2009
5
©
Velleman
®
Components nv
4.
Features
•
converts audio/video line level signals from a DVD player, video game
system, camcorder or other device to an RF signal and adds this signal as
extra channel on the antenna cable to enable multiple TV connections
•
easily distribute video-signals over an RF network
•
connects one audio/video device to a television set
•
selection between different video channels
5.
Overview
Refer to the illustration on page 2 of this manual
1
antenna/cable input
6b
audio in - R
2
TV/VCR/cable output
6c
audio in – L
3
power input
7
power on/off switch
4
SCART input
8
channel down button
5
SCART output
9
channel up button
6a
video input
10
channel display
6.
Installation
•
Choose the appropriate location to insert the RF modulator into the
antenna/cable circuit. Keep in mind that only the devices physically located
behind the RF-modulator in the cable network will be able to receive the
extra inserted channel.
•
Connect an input device to the SCART input
[4]
or video
[6a]
& audio
inputs right
[6b]
and left
[6c]
.
Do not switch it on yet.
•
Connect the connector coming from the antenna or cable television input to
the antenna/cable input
[1]
.
•
Connect the TV/VCR/cable output
[2]
to a TV set or a cable network if
present inside the house.
•
Make sure the included power adaptor is compatible with your mains. Plug
the DC power adaptor into the power input
[3]
.
Only
use the included
adaptor or an adaptor with identical specifications.
•
An extra device can be connected to the SCART output
[5]
. Note that this is
only a loop through connector thus receiving only the signal from the
connected input device. Other TV channels are not available at this output.
•
Switch on the RF modulator by switching the power on/off switch
[7]
to
the ON position. The channel display
[10]
lights up and shows the
current channel on which the input signal will be broadcasted.
