VMBKP
34
Velbus
–
Legen Heirweg 33, BE-9890 Gavere, Belgium
–
tel. +32 9 384 36 11
–
e-mail: [email protected]
–
www.velbus.eu
PN-VMBKP-ed1-A4
•
1
–
9 9:
Egress Delay Timing
. Enter a number in the 1-99 range to enable the Egress Delay. The number is the
delay in seconds, which starts to count when the Egress Button is pressed. User Group 1 channel activates when
the Egress delay expires.
NOTES:
1)
Pulse Mode
: The Egress Delay starts to count when the egress button is momentarily pressed. User Group 1 channel
activates automatically when the delay expires.
2)
Holding Mode:
The user MUST hold the egress button for the whole period of the Egress Delay and only then User
Group 1 channel activates. If the Egress button is released before the end of the Egress Delay, the timer will reset and
User Group 1 channel will NOT be activated.
For safety reasons it is advised to put a sticker next to the Egress button explaining how to open the door if Holding
Mode is enabled.
Example: A sticker for an egress button that is programmed with Holding Mode and an Egress Delay of 5 seconds.
3) The Egress Delay does not affect the operation of the User Codes/Cards for User Group 1. The User Codes/Cards
always give INSTANT action.
4.
Validation
•
Press the # key once. A double beep confirms the entry.
Examples
Example 1
Set Egress Button in Pulse Mode with a 5 seconds Egress Delay & Warning beeps
9 0
2
5
#
(1)
(2)
(3)
(4)
1.
Egress function programming
2.
Pulse Mode with Warning Beeps
3.
Delay time of 5 seconds before User Group 1 channel is activated
4.
Entry confirmation
Example 2
Set Egress Button in Holding Mode with an Egress Delay of 10 seconds and Warning beeps
9 0
5
1 0
#
(1)
(2)
(3)
(4)
1.
Egress function programming
2.
Holding mode with Warning beeps
Press & hold the button
for at least 5 seconds
until the door opens
Содержание VMBKP
Страница 1: ......