19
The list of files in a group can be changed in the menu
Configuration
/
File groups
/
Edit file list
. Correct the
list of files in the following dialog using the
key and confirm by pressing
.
To add a short note to the file group, go to the menu
Configuration
/
File groups
/
Edit note
. The note will be
displayed with the data when downloaded to a PC.
7.3. User settings
Depending on the environment, the operator may need to change the scale display and sound signals.
To set the light intensity of the display, go to
User settings
/
Display backlight
. Increase or decrease the contrast
of the display in the menu
User settings
/
Display contrast
.
To set the “saving the weight” sound volume, go to the menu
User settings
/
Saving volume
.
7.4. Calibration
The scale is calibrated from factory. If the calibration needs to be adjusted, go to menu
Maintenance / Weighing
/ Calibration
and follow the on screen instructions.
Remove all from the hook and press
. A dialog for entering the weight is displayed.
Hang a known weight on the scale, enter the weight value and press
.
7.5. Password protection
Improper setting of the weighing parameters in the menu
Configuration
and
Maintenance
may cause problems
when using the scale.
To protect the settings, enter a simple password as follows.
1.
Perform the basic setting of the scale as described in this manual.
2.
Protect the menu by password against accidental or unwanted overwriting of important parameters.
Select the menu
Maintenance
/
Password
and confirm the following dialog by pressing
.
