• Master Code
Required for programming and feature settings. Master code can be
used to unlock the door under vacation mode. The default master
code needs to be changed before programming.
Property owner & manager should keep this information confidential.
• Auto Lock
Automatically locks the deadbolt 30 seconds after unlocking. This
feature is off by default. You can customize the Auto Lock time delay
between 10 and 99 seconds.
• Key Unlock
Key Unlock is always available when the batteries are completely
dead or valid User Codes are forgotten.
• Low Battery Indicator
If you hear 10 beeps along with 10 red light flashing after pressing
any key to lock or unlock the door, that’s an alert for replacing
batteries. Please replace with 4 brand new AA alkaline batteries and
do not mix used and new batteries. All settings are stored in the lock
while the batteries are removed and replaced.
• Wrong Entry Limit
After 10 unsuccessful attempts at entering an invalid PIN code, the
unit will shut down for 3 minutes.
• Silent Mode
The beep sounds when pressing keypad can be muted. But you will
still hear low battery and system alerts.
• Vacation Mode
This is a security feature for you when you are leaving your home for
vacation or long trip. Enabling vacation mode will restrict all user
codes until master code is entered on keypad. If the lock would be
unlocked by the thumb turn from the inside, the lock will sound an
alarm.
• One Time User Code
This code only can be used once and will be automatically deleted
after used.
• Unlock with Fake code
User can prevent pin code exposure from strangers by entering
random digits before or after pin code.
Definitions
Programming Basic
11
