19 / 77
SYSTEM
REBOOT
This function restarts the device without clearly the
settings performed by the user. The camera is
repositioned.
Table 3
4.5.1. SYSTEM MENU
In the main menu, select
SYSTEM
to set the parameters such as protocol, baud rate, camera address, dome label, display setup,
password, bootup screen and position memory.
Screen 3: System
Option
Value
Explanation
SOFT DIP SWITCH
Program protocol, address, baud rate via OSD
menu.
DOME LABEL
Dome label setting submenu
DISPLAY SETUP
Display submenu: program the info to be
displayed on screen.
PASSWORD
Password submenu
BOOTUP SCREEN
Boot up screen submenu
POSITION
MEMORY
ON/OFF
Remember the camera position of last power
off.
Table 4
SYSTEM
- - - - - - - - - - - - - - - - - - - - - - - - - -
- -
1. <SOFT DI P SWI TCH>
2. <DOME LABEL>
3. <DI SPLAY SETUP>
4. <PASSWORD>
5. <BOOTUP SCREEN>
6. POSI TI ON MEMORY: OFF
7. BACK
8. EXI T
