Chapter 3 Mechanical and Electrical Installation
ACH200 Series High Voltage Variable Frequency Speed Control System Operating Manual
30
Figure.3-6
3)
Rolling bar (recommended):
This is the easiest method. Place a number of side by side rollers on the floor, place the cabinet
on top of the side by side rollers and move the rollers in a circular motion for handling. (The length
of the roll bar should exceed the thickness of the cabinet; the diameter should not be less than 50
mm and the distance between the roll bars should not be greater than 500 mm)
Figure.3-7
3.2.4 Unpacking
If you find any problems with your order or if the product does not meet the specifications you
have ordered, please contact the agent who ordered the equipment or contact our nearest office.
1)
Check the nameplate of the high voltage variable speed control system to confirm the model
