Version 0.6
29 November 2004
Page 26 of 42
For use with Vega 100 E1 – SIP version 08.02.06 T007 or greater.
© 2002-2004 VegaStream Ltd.
For the configuration indicated in the initial diagram DSL1 = connection to the PSTN and DSL 2 is
a connection to a PBX. Therefore the Vega needs DSL 1 configured as TE (and a blue booted
cable used on DSL 1), and DSL 2 configured as NT (and a red booted cable used on DSL 2).
Bus Master needs to be configured to point to a TE trunk – to identify where the Vega will
synchronise its internal clock from – in this configuration this should be 1 (DSL 1).
These are the default settings of the Vega and so no changes are required to the Network
Terminator, Clock_Master, or Bus_Master settings.