Vega VEGASOURCE 86, Руководство по эксплуатации

Страница: 18 / 56

18
4 Mounting
VEGASOURCE 86 • Source holder
1008685-EN-230810
4 Mounting
4.1 General instructions
•
For mounting of VEGASOURCE 86 you need a special handling
permit.
•
Mounting may only be carried out by authorized, qualified person-
nel who are monitored for radiation exposure according to local
laws or the handling permit. Take note of the specifications in the
handling permit. Also take the local conditions into account.
•
Carry out all work within the shortest possible time and at the larg-
est possible distance. Provide suitable shielding
•
Avoid risk to other persons by taking suitable measures (e.g.
safety fence, etc.)
•
All mounting and dismounting work must only carried out with the
switch in position " OFF ", secured with a lock.
•
When mounting, take the weight of the source holder into account.
The device weight can be found in chapter " Technical data ".
•
Depending on the version, the centre of gravity of VEGASOURCE
86 can vary. Keep this in mind during crane transport on the lifting
lugs.
Mounting with a crane
Warning:
Check the hoisting equipment for sufficient lifting capacity.
You can find the device weight in the "
Technical data ".
Persons must never stand beneath the loads.
The source holder is screwed onto a transport board. Loosen the
screws and lift the source holder from the transport board. For this
purpose you have to use the lifting lugs of the source holder.
Use a suitable lifting tackle (lifting strap, etc.) to fasten the source
holder to the crane hook.
Versions with manual switching ON/OFF
Protect the source holder against moisture and hence against cor-
rosion. If the source holder is exposed directly to the elements, you
should cover it with a roof or a suitable protective bonnet.
If you expect heavy soiling or dust on the source holder, use the
optional protective cap.
Version with position switches
Use the recommended cables (see chapter " Connecting to power
supply ") and tighten the cable gland.
You can give your instrument additional protection against moisture
penetration by leading the connection cable downward in front of the
cable gland. Rain and condensation water can thus drain off. This
applies mainly to outdoor mounting as well as installation in areas
where high humidity is expected (e.g. through cleaning processes) or
on cooled or heated vessels.
General information
Moisture