Vega VEGASOURCE 86, Руководство по эксплуатации

Страница: 38 / 56

38
8 Dismount
VEGASOURCE 86 • Source holder
1008685-EN-230810
Note:
Take pictures of the condition of the source holder for documentation
purposes. This is recommended if the source holder or parts of it are
corroded or damaged.
Note:
Prior to return, a Recurring test before return shipment must be car-
ried out by an authorised person.
See also information on "
Autorised personnel " in chapter " For your
safety " and the test instructions in chapter " Maintenance and fault
rectification ".
Conditions for a return shipment
The following conditions must be fulfilled before return shipment. See
also checklist in chapter " Checklist Type A packaging " (recurring test
before return shipment)
•
An inspection certificate of the contamination test (wipe test certifi-
cate) of the source, which is not older than three months, must be
available at the time of return shipment.
•
Keep specifications on the serial number of the source capsule,
the type of source and the activity or type of source ready. These
data are available in the documents supplied along with the
source. Enclose a copy of the manufacturer's certificate of the
source.
•
No significant traces of corrosion on the source holder which could
endanger the function or safe storage of the source.
•
No serious damage due to fire or mechanical influences (deforma-
tions, dents, etc.)
•
The switching mechanism of the source holder functions perfectly.
Set the source holder to " OFF ". and secure this position with a
lock.
•
The return shipment must be made in a type-tested type A pack-
aging in accordance with the requirements of transport law rules
(ADR/RID, IATA/DGR). The source holder VEGASOURCE 86 is
suitable for return shipment. In case of doubt, your sales partner
will provide you with suitable transport packaging.
•
Label the package in accordance with the requirements of trans-
port law (ADR/RID, IATA/DGR) and probable deviating national
regulations. If necessary, carry out further control measurements
in accordance with national and international regulations.
In case of doubt, talk to your relevant authority or an appropriately
competent institution.
Re-shipment of a type A packaging
During the initial shipment, we ensure that the source holder meets
the requirements of a type A shipping package for safe transport.
In the case of onward or return shipment, the responsibility for the
condition of the source holder lies with the subsequent sender. This
applies especially if the source holder has been installed in a facility
for a longer period of time.