Vega VEGAPULS Air 41 Скачать руководство пользователя страница 12

Страница: 12 / 60

4 Mounting

VEGAPULS Air 41 • Autarkic device with measured value transmission via radio technology

64808-EN-210426

4 Mounting

4.1 General instructions

The instrument is suitable for standard and extended ambient condi-

tions acc. to DIN/EN/IEC/ANSI/ISA/UL/CSA 61010-1. It can be used

indoors as well as outdoors.

Note:

For safety reasons, the instrument must only be operated within the

permissible process conditions. You can find detailed information on

the process conditions in chapter "

Technical data

" of the operating

instructions or on the type label.
Hence make sure before mounting that all parts of the instrument ex-

posed to the process are suitable for the existing process conditions.

An activated device (see chapter "

Activate device

") also carries

out measurements in horizontal alignment. This also applies if it is

mounted on a mobile container and the container is transported in a

tilted state.

Note:

When mounting the device in a mobile container, ensure that it is

protected against damage throughout transport.

4.2 Mounting instructions

Radar sensors for level measurement emit electromagnetic waves.

The polarization is the direction of the electrical component of these

waves.
The position of the polarisation is in the middle of the type label on the

instrument.

Fig. 5: Position of the polarisation
1 Middle of the type label

Note:

When the device is rotated, the direction of polarization changes and

hence the influence of the false echo on the measured value. Please

keep this in mind when mounting or making changes later.

When mounting the device, keep a distance of at least 200 mm

(7.874 in) from the vessel wall. If the device is installed in the center

of dished or round vessel tops, multiple echoes can arise. However,

these can be suppressed by an appropriate adjustment (see chapter

Setup

").

Ambient conditions

Process conditions

Measurement function

and transport

Polarisation

Installation position

Содержание VEGAPULS Air 41





























































Результаты поиска

Содержание VEGAPULS Air 41

Отзывы:

Бренды по названию

Популярные бренды

Vega VEGAPULS Air 41, Руководство по эксплуатации

Результаты поиска

Содержание VEGAPULS Air 41

Отзывы:

Бренды по названию

Популярные бренды