18
6 Activate, device functions
VEGAPULS Air 23 • Autarkic device with measured value transmission via radio technology
64314-EN-230606
6 Activate, device functions
6.1 Activate
To activate the device from the deactivated state, the following options
are available:
•
By smartphone with VEGA Tools app via NFC
•
Via magnet (activation via magnet is not possible with the mount-
ing version with magnets)
It is not necessary to open the device for activation.
Note:
The device is deactivated in the VEGA Inventory System. A reactiva-
tion of the device in the VEGA Inventory System is not possible, but is
carried out on site via smartphone or magnet. Take this into account
before deactivation!
By smartphone
Proceed as follows for activation:
1. Activate NFC communication
2. Start VEGA Tools app
3. Select sensor activation
4. Hold the smartphone close to the top of the radar sensor above
the lettering "
VEGA
"
2
1
3
Fig. 10: Activate sensor - Smartphone
1 Radar sensor
2 Contact surface for NFC communication
3 Smartphone
5. Pull smartphone down slowly
The app confirms the successful activation with the message:
"The sensor was activated, serial no.: ………, device VEGAPULS Air
23"
Setup is now complete and the unit is ready for operation.
Overview
Activate device - glue
mounting