14
VEGADIS 61
27721-EN-021127
Connecting to the sensor
5.2 Connection steps
Please proceed as follows:
1 Remove the cover of the housing
2 Turn PLICSCOM to the left and take it off
Fig. 5:
Dismounting the indicating and adjustment module PLICSCOM
3 Loosen the compression nut of the cable entry
4 Dismantle the connection cable approx. 10 cm,
remove approx. 1 cm insulation from core wires
5 Push the cable through the cable entry into
VEGADIS 61
6 Raise the opening lug of the terminals with a
screwdriver
7 Insert the core ends into the open terminals ac-
cording to the wiring diagram