Vega VEGADIF 85, Быстрая настройка, Страница: 15 / 24

15
5 Set up with the display and adjustment module
VEGADIF 85 • Profibus PA
53575-EN-230814
The actual product level during this adjustment is not important,
because the min./max. adjustment is always carried out without
changing the product level. These settings can be made ahead of
time without the instrument having to be installed.
5.3 Parameter adjustment - Extended adjustment
For technically demanding measuring points, you can carry out
extended settings in " Extended adjustment ".
The main menu is divided into five sections with the following func-
tions:
Setup: Settings, for example, to measurement loop name, applica-
tion, units, position correction, adjustment, AI FB 1 Channel - scaling
- damping
Display: Settings, e.g., for language, measured value display, lighting
Diagnosis: Information, e.g. on instrument status, peak indicator,
measurement reliability, AI FB 1 simulation
Additional adjustments: PIN, date/time, reset, copy function
Info: Instrument name, hardware and software version, date of manu-
facture, sensor features
To ensure optimum adjustment of the measurement, the individual
submenu items in the main menu " Setup " should be selected one
after the other and provided with the correct parameters. The menu
items are described in the following.
5.4 Menu overview
Menu item Parameter Default value
Instrument ad-
dress
126
Measurement
loop name
Sensor
Application Application Level
Units Unit of measure-
ment
mbar (with nominal measuring range
≤ 400 mbar)
bar (with nominal measuring ranges
≥ 1 bar)
Temperature unit °C
Main menu
Setup