Vega VEGADIF 85 Скачать руководство пользователя страница 11

Страница: 11 / 96

3 Product description

VEGADIF 85 • Profibus PA

53569-EN-230814

3.4 Packaging, transport and storage

Your instrument was protected by packaging during transport. Its

capacity to handle normal loads during transport is assured by a test

based on ISO 4180.
The packaging consists of environment-friendly, recyclable card

board. For special versions, PE foam or PE foil is also used. Dispose

of the packaging material via specialised recycling companies.

Caution:

Instruments for oxygen applications are sealed in PE foil and provided

with a label "Oxygen! Use no Oil". Remove this foil just before mount

ing the instrument! See instruction under "

Mounting

Transport must be carried out in due consideration of the notes on the

transport packaging. Nonobservance of these instructions can cause

damage to the device.

The delivery must be checked for completeness and possible transit

damage immediately at receipt. Ascertained transit damage or con

cealed defects must be appropriately dealt with.

Up to the time of installation, the packages must be left closed and

stored according to the orientation and storage markings on the

outside.
Unless otherwise indicated, the packages must be stored only under

the following conditions:

•

Not in the open

•

Dry and dust free

•

Not exposed to corrosive media

•

Protected against solar radiation

•

Avoiding mechanical shock and vibration

•

Storage and transport temperature see chapter "

Supplement -

Technical data - Ambient conditions

•

Relative moisture 20 … 85 %

With instrument weights of more than 18 kg (39.68 lbs) suitable and

approved equipment must be used for lifting and carrying.

3.5 Accessories

The instructions for the listed accessories can be found in the down

load area on our homepage.

The display and adjustment module is used for measured value indi

cation, adjustment and diagnosis.
The integrated Bluetooth module (optional) enables wireless adjust

ment via standard adjustment devices.

The interface adapter VEGACONNECT enables the connection of

communication-capable instruments to the USB interface of a PC.

Packaging

Transport

Transport inspection

Storage

Storage and transport

temperature

Lifting and carrying

Display and adjustment

module

VEGACONNECT

Содержание VEGADIF 85

































































































Результаты поиска

Содержание VEGADIF 85

Отзывы:

Vega VEGADIF 85, Руководство по эксплуатации, Страница: 11 / 96

Результаты поиска

Содержание VEGADIF 85

Отзывы: