Vega SI-12 / User Manual
10
Revision 12 – 03 July 2020
INDICATION
There is one red LED in the board next to the start button. The indication is only used
when the device is activated in the LoRaWAN network and when the operating modes are
changed.
LED signal
Meaning
Series of short flashings
Linking to the network
One long flashing
The device connected to the
network and is in active mode
Three long flashings
The device switched to the
«Storage» mode
In case of connection attempt fail, the device will continue to accumulate
data and will attempt to connect to the network every 6 hours
