Vega NB-14 / User Manual
18
Revision 03 – 14 July 2020
“SETTINGS” TAB
The " Settings" tab allows to configure various parameters of the network connection
and device operation.
Connection settings
– a group of parameters set up the data collection and transmitting.
Used frequency bands
for NB-IoT devices connection can be different for different
cellular operators. You can ask the operator about used band or select all the bands.
Network registration timeout
– it’s a period after which the modem will switch to the
‘Sleep” mode when registration waiting. For battery economy it’s better to set minimal period
for which the device can registered in the network in the specific covering conditions.
Cellular operator can give you
APN
or set it by default if the field is empty.
Time zone
set up for the data collection period which is equal to the device time (UTC)
plus time zone. Transmission period is always use UTC time regardless of the time zone setting.
Readings collected at 00:00 if the collection period is 24 hours; at 00:00 and at 12:00 if
the period is 12 hours etc. All readings stored in the device memory until the next
communication session.
