Key:
NA
– No Up Light
D
– Base Down, U – Base Up
E26
– Medium Screw Base
DIM
– Bluetooth control for ON/OFF and setting lamp dimming level.
** Product also available in fixed mounted Retrofit Kits. Consult Vega for options.
These installation instructions apply to the VEGA D4A Medium Lamp models designated below.
D4A E26 LED HID REPLACEMENT
INSTALLATION GUIDE
Vega Light Control Systems
●
Holland, Michigan 49423
Model - Watts - CCT - Type - Acc. Cap -
Base Down/Up - Control
Applications
D4A - 20M -
22K
- T5M -
NA
-
E26
D
-
STD
HID Replacement in Post Top and Pendant
D4A - 30M -
30K
- T3M -
**
U
-
DIM
Style Luminaires With 19” Globes and
D4A - 40M -
40K
Vertical Lamps
-
50K
E26 Medium Base D4A
5024803 REV B
AVERTISSEMENT
CAUTION
• WARNING - RISK OF FIRE OR ELECTRIC SHOCK. LUMINAIRES WIRING, POWER SUPPLY, OR OTHER
ELECTRICAL PARTS MAY BE DAMAGED WHEN DRILLING FOR INSTALLATION OF RETROFIT KIT HARDWARE.
INSPECT WIRING AND COMPONENTS FOR DAMAGE.
• WARNING - RISK OF FIRE OR ELECTRIC SHOCK. LED RETROFIT KIT INSTALLATION REQUIRES KNOWLEDGE
OF LUMINAIRES ELECTRICAL SYSTEMS. IF NOT QUALIFIED, DO NOT ATTEMPT INSTALLATION. CONTACT A
QUALIFIED ELECTRICIAN.
• WARNING - RISK OF FIRE OR ELECTRIC SHOCK. INSTALL THIS KIT ONLY IN LUMINAIRES THAT HAVE THE
CONSTRUCTION FEATURES AND DIMENSIONS SHOWN IN THE PHOTOGRAPHS AND/OR DRAWINGS AND
WHERE THE INPUT RATING OF THE RETROFIT KIT DOES NOT EXCEED THE INPUT RATING OF THE
LUMINAIRE.
• WARNING - TO PREVENT WIRING DAMAGE OR ABRASION, DO NOT EXPOSE WIRING TO EDGES OF SHEET
METAL OR OTHER SHARP OBJECTS.
• DO NOT MAKE OR ALTER ANY OPEN HOLES IN AN ENCLOSURE OF WIRING OR ELECTRICAL COMPONENTS
DURING KIT INSTALLATION.
• ONLY THOSE OPEN HOLES INDICATED IN THE PHOTOGRAPHS AND/OR DRAWINGS MAY BE MADE OR
ALTERED AS A RESULT OF KIT INSTALLATION. DO NOT LEAVE ANY OTHER OPEN HOLES IN AN ENCLOSURE
OF WIRING OR ELECTRICAL COMPONENTS.
• THE RETROFIT KIT IS ACCEPTED AS A COMPONENT OF A LUMINAIRE WHERE THE SUITABILITY OF THE
COMBINATION SHALL BE DETERMINED BY AUTHORITIES HAVING JURISDICTION. PRODUCT MUST BE
INSTALLED BY A QUALIFIED ELECTRICIAN IN ACCORDANCE WITH THE APPLICABLE AND APPROPRIATE
ELECTRICAL
CODES.
THE INSTALLATION
GUIDE
DOES
NOT
SUPERSEDE
LOCAL
OR
NATIONAL
REGULATIONS FOR ELECTRICAL INSTALLATIONS.
• AVERTISSEMENT - RISQUE D’INCENDIE OU DE CHOC ÉLECTRIQUE. LE CÂBLAGE DES LUMINAIRES, LES
BLOCS
D’ALIMENTATION OU LES AUTRES COMPOSANTS ÉLECTRIQUES PEUVENT SUBIR DES DOMMAGES
LORS DU PERÇAGE EN VUE
D’INSTALLER LA QUINCAILLERIE D’UN NÉCESSAIRE DE MODERNISATION.
VÉRIFIER SI LES CÂBLES ET LES COMPOSANTS SONT ENDOMMAGÉS.
• AVERTISSEMENT - RISQUE D’INCENDIE OU DE CHOC ÉLECTRIQUE. L’INSTALLATION DE CE NÉCESSAIRE DE
MODERNISATION EXIGE UNE PERSONNE FAMILIÈRE AVEC LA CONSTRUCTION ET LE FONCTIONNEMENT
DU SYSTÈME ÉLECTRIQUE DU LUMINAIRE ET DES RISQUES ASSOCIÉS. TOUTE PERSONNE QUI
N’EST PAS
QUALIFIÉE NE DOIT FAIRE AUCUNE TENTATIVE
D’INSTALLATION ET DOIT CONTACTER UN ÉLECTRICIEN
QUALIFIÉ.
• THIS IS A LINE DRIVEN 120VAC-250VAC LAMP. DO NOT INSTALL ABOVE 250VAC.
• THIS LAMP IS NOT RATED FOR USE WITH HID BALLAST OR EXTERNAL LED DRIVER.
• DO NOT USE WITH STANDARD DIMMERS.
• SUITABLE FOR DAMP LOCATIONS – DO NOT USE WHERE DIRECTLY EXPOSED TO WATER.
• THIS DEVICE IS NOT INTENDED FOR EMERGENCY LIGHTING OR FOR USE WITH
EMERGENCY EXITS.
• PLEASE READ ALL INSTRUCTIONS BEFORE ATTEMPTING INSTALLATION.
20211001
