Important Information
—
Please Read Before Use
12
/
20
File No.: IR-IM-001
The device measure result is not accurate.
The measure sensor is dirty, and need to
use a clean soft cloth or cotton bud that
can be moistened with 70% alcohol.
The patient uses the device
immediately after exercising or walking a
long time. And need to rest for 5 mins to
10mins to measure the temperature.
The device displays the symbol”Err”.
The operation environment temperature
changes suddenly, and the temperature
difference is greater than 8
℃
, the device will
display ”Err”. And it just needs to put the
device in the operation environment for
20mins and more, after that to use the device.
10.
Safety precaution:
——
Indicates a potentially hazardous situation which, if not avoided, could result in
serious injury.
Read all instructions carefully before use.
Warning:
No modification of this equipment is allowed.
Check the thermometer for signs of damage or wear before each use. Damaged
or worn thermometer should not be used.
Under any circumstances, the temperature taking result is ONLY for reference.
Before taking any medical action, please consult your physician.
MR UNSAFE: The device cannot be used in an MR environment.
The user should report any serious incident that has occurred in relation to the
device to the manufacturer and the competent authority of the Member State in
which the user and/or patient is established.
10-1. Product cautions:
If the sensor is degraded or loosened, and the measure value is incorrectly, please stop using
the device immediately and contact your equipment provider.
To avoid electrical shock: Keep the unit away from water. Do not immerse the unit in liquid.
Do not use while bathing. Do not reach for a unit that has fallen into water.
Never operate the unit if it has any damaged parts, if it has been dropped or submersed in
water. Promptly send it to a service center for examination and repair.
If any abnormality occurs, discontinue use until the unit has been examined and repaired.