Vega NB-15 / User Manual
14
Revision 01 – 22 January 2020
CONNECTION TO THE DEVICE
For the connection to the device, perform the following steps:
1.
Connect the USB cable to the device.
2.
Start the "Vega NB-IoT Configurator" application.
3.
Click the "Connect" button in the menu on the left.
The application automatically recognizes the type of device, and the device selection
menu becomes inactive.
To read the settings from the device, you need to click the "Get settings" button, until
this point the application will display the default settings or from the last connected device.
After making the necessary changes to the settings, you should click the "Apply settings"
button and only then disconnect from the device with the "Disconnect" button. Also, the
application allows to save settings into a file after what you can load it from that file on other
similar devices for speed up the debugging process.
