VEF TA-203
INTRODUCTION
This manual is made in order to familiarize you with your phone set. In order to get maximum benefits of this product, we suggest that
you read the User’s manual carefully before using your phone set.
FEATURES
FSK/DTMF dual system auto switch, FSK message auto-adjusts the time of the unit.
LCD displays incoming number, date, time and total incoming calls
8 kinds of ringer melody
LCD brightness adjustable
Outgoing dialed number and conversation time review and redial back.
Local area code setting.
Fast checking the incoming call by calling number and calling date & time.
On-hook pre-dial and edit dialing number.
Real-time clock display.
Hands-free dial and speak, conversation time display.
P
→
T switch.
Ringer H/L adjustable.
Alarm clock.
3 one touch and 10 two touch memories.
Desktop/ wall mountable.
INSTALLATION
This phone requires 3 AAA-sized 1.5V batteries. Open the battery compartment cover and insert the batteries in the right polarity, then
close the cover. When you find that LCD becomes very dark or some function is not correct, please change the batteries.
Plug line cord into jack at the rear of the telephone base, the other end of the line cord should be connected to the telephone line. Plug
coiled cord into handset modular jack. Plug the other end into the jack at the left side of the telephone. Set ringer volume according to
your personal preference. Set the P/T switch as required by your telephone exchange.
Caller ID function is available only after you apply this service to the local telecom company.
SYSTEM SET UP
SET DATE
At on-hook state, press SET, LCD will display –01234567-. Then press 1 to edit the YEAR, DATE, CLOCK, and MINUTE. The LCD will
show 2002
Y
1 M 1 D AM 00:00 Digit for 02 (represents the YEAR) will flash, press 0-9 to edit the YEAR then the 1 will flash, press 0-9
to edit the MONTH, then the 1 will flash, press 0-9 to edit the DATE then the 00: will flash, press 0-9 to edit the HOUR, then the 00 will
flash, press 0-9 to edit the MINUTE. Then finish the DATE setting. Then press SET to confirm.
SET LCD BRIGHTNESS
At on-hook state, press the SET, LCD will display –01234567-. Then press 2 to edit the LCD BRIGHTNESS, the LCD will display LCD 3-
，
press UP or DOWN to select the LCD brightness you like. Then press SET to confirm.
SET AREA CODE
At on-hook state, press the SET, LCD will display –01234567-. Then press 3 LCD will display AREA -----, and - will flash to indicate to
set AREA CODE. Press 0-9 to adjust the AREA CODE number and press SET to confirm.
EXAMPLE: Set CODE 755: .7 +5 + 5 + SET
SET FLASH TIME
At on-hook state, press the SET, LCD will display –01234567-. Then press 4, LCD will display FLASH 600 ,Press UP or DOWN to
adjust the FLASH TIME, there are six kinds of flash time for your selection: 90/120/180/300/600/1000ms. Press SET to confirm.
SET ALARM CLOCK
At on-hook state, press the SET, LCD will display –01234567-. Then press 5 to edit the ALARM CLOCK function. This telephone has 3
groups of morning call time setting. The LCD will display AL 123, press 1 then press * to activate setting the first Alarm Call time (press *
again to cancel the morning call). The LCD will display AL 1 00:00, press the numerical keys 0 – 9 to set the time and press the SET go
to the second ALARM clock setting. Repeat this procedure for setting second and third alarm clock and press SET to confirm. When it
comes to the time set, the telephone will sent out “BI… BI…” alarming. Be sure the out line is connected with the unit.
SET LONG DISTANCE CODE
At on-hook state, press the SET, LCD will display –01234567-. Then press 6 to edit the LONG DISTANCE CODE function. The LCD will
display L CODE 0----, input the code, press # to cancel the long distance code setting.
SET RINGER MELODY
At on-hook state, press the SET, LCD will display –01234567-. Then press 7 to edit the RINGER MELODY function. The LCD will
display RING 01-RING08 . Press UP or DOWN to select the melody.
SET PBAX CODE
At on-hook state, press the SET, LCD will display –01234567-. Then press 0 to edit the PBAX CODE function. The LCD will display 0
CODE ----, input the code, press # to cancel the PBAX code setting.
RINGER VOLUME ADJUSTMENT
Slide the ringer switch to H/L to adjust the ringer volume according to personal preference.
P/T MODE ADJUSTMENT
Slide the switch to P/T position to select PULSE or TONE dialing mode. When you dial a number in the pulse mode, you can just press *
button to switch once to tone mode.
