VeEX VePAL TX320s, Руководство пользователя

Страница: 18 / 123

4.2 Launching Test Applications
The Test Cards summary/status screen offers intuitive test application management (launch, monitor, switching and release). Each
test card is associated with a test module (orange numbers) and their individual test port groups (white numbers); capable of
showing two, three or four possible tests, depending on the capabilities of the modules installed in the test platform.
Test Cards are aligned in the same order of modules and ports they represent, for easy identification and correlation.
Select the test card related to the desired module and port group, to start a test mode configuration, then follow the
already familiar process.
Use the chassis yellow App rubber button to quickly toggle among the active tests (up to four independent tests).
Use the Test Cards icon, on the top-left corner of the screen, to see a summary of all running tests, available test
resources, switch to a different test (touch on the status box with the magnifying glass icon), and release tests.
Once a new test port group has been selected, using the New button on its Test Card, users can select the specific
test interface type (Test Port), if required. Then the test module will present a menu of all applicable technologies
(protocols) available for the selected port (QSFP-DD, CFP, SFP+, BNC, Bantam, RJ48, etc.)
This procedure can be started at any time, from any screen or menu.
1. Identify an available Test Card (gray) and tap on the New button to launch the Test Mode Selection menu.
Depending on the hardware configuration, up to four tests can run simultaneously.
Some application allocate two test cards or port groups and they are normally available from Port 1 (e.g. router wrap-around
tests, monitoring, etc.)
TX300s_Platform_Manual_RevB01 Page 18 of 123