VeEX RXT-1200, Руководство пользователя

Страница: 19 / 117

4.2 Launching Test Applications
A Quick Guide is always presented in the Home screen after boot up.
This procedure can be started at any time, from any screen or menu.
1. Select an empty Test App button.
Up to two independent tests can run simultaneously (test set or test module dependent)
Some test applications may require two port groups (e.g. router wrap-around test) and may not be supported by all test
modules or test sets configurations
2. Select the desired Test Mode Based on the application to be tested.
3. Tap on the OK button to confirm.
The test port group is assigned to the selected test application and the required software/firmware is loaded.
4.3 Understanding Test Application GUI
RXT1200_Platform_Manual_RevB01 Page 19 of 117