VeEX OTDR FX150+ Series, Руководство пользователя

Страница: 73 / 109

OTDR Series e-Manual, D07-00- 076P -RevD00 Page 73 of 109
To set up and use the automated V-Scout mode:
1. Select the Autosave parameters in the Setup tab. See the
Autosave Parameters
section
for more details.
2. Tap the green
Start
button. Elapsed time and acquisition wavelength are indicated below
the red Stop button.
3. When the acquisition is complete, the Stop button will revert back to a green Start button.
If needed, tap Stop to terminate the measurement manually.
4. To view the results, select the V-Scout tab.
7.1.4.2 V-Scout Link Map
Any event that exceeds user-defined Pass/Fail thresholds will be displayed in
RED
font. The
icon box will be outlined in red. For information on symbols, see
V-Scout symbols.
V-Scout Link Map
•
Start: Begins the measurement.
• Rebuild: Reanalyzes the trace. Use this option when you change the trace event
table(s) or icons want to rebuild the LinkMap to apply the changes.
•
Modify: Modifies the LinkMap.
•
Span: Defines Span Start and Span End event or Edit Span Setup details.
•
Information: Displays measurement information.